Ready to use Microcement – Oxyda Hybrid 5LT

Price range: £495.00 through £531.00

OXYDA HYBRID Microcement completes the application cycle of Oxyda Iron as it can be applied instead of transparent protective finishes. OXYDA HYBRID comes in paste form and is a compound of natural fillers mixed together with resinous fillers that create a hybrid mix such that, once applied and dried, they naturally give the product its own water-repellency, leaving the natural matte effect of the microcement unchanged. Furthermore, Oxyda Hybrid is very resistant, so it can be applied to the floor and worktops, but it is especially recommended for SHOWER TRAYS.

Colour Selector

Oxyda Colors

Clear

- +

Ready to use Microcement - Oxyda Hybrid 5LT

Ready to use Microcement - Oxyda Hybrid 5LT - Image 3

Ready to use Microcement - Oxyda Hybrid 5LT - Image 4

Ready to use Microcement - Oxyda Hybrid 5LT - Image 5

Description

OXYDA HYBRID is not self-supporting, so it requires a smooth and strong support shelf, such as marble or a surface where OXYDA IRON has already been fully applied (or alternatively OXYDA FONDO).
If available, apply a coat of HYDROFINISH SPECIAL PLUS to the support treated with OXYDA IRON or FONDO OXYDA. This will close the various pores of the surface, allowing for easier application of OXYDA HYBRID and a more uniform application.
If you do not have HYDROFINIS SPECIAL PLUS, you can apply OXYDA HYBRID directly to the support (applied FONDO OXYDA, applied OXYDA IRON).
Before application, color the product according to the desired color. The color can be chosen from the appropriate folder or the OXYDA folder. Ask the supplier for information on the correct coloring.
Once colored, apply evenly to the surface with Frattone Inox, making sure to smooth during application, creating a typical waxed cement smooth effect. While troweling the product, it is recommended to mist the surface with water and continue troweling, smoothing, and making the entire surface uniform.
Normally one coat is enough, but if necessary because perhaps the surface was not well covered, once the first coat is dry, a second coat can be applied. Or if you only need to perfect the uniformity of the effect, you can apply a thin second coat immediately after the first application. In any case, it is recommended to mist with water during the troweling and smoothing phase.
Once the product is dry, it has natural water-repellent properties; for greater protection, we recommend applying a coat of TRANSPARENT HYBRID PROTECTIVE.
Apply the protective with a short-haired roller, applying a thin layer and trying to promote absorption by applying the product well with the roller in a vertical and horizontal direction.
Allow to dry for at least 36-48 hours before walking on the surface

Lorem Ipsum

Nemo enim ipsam voluptatem quia voluptas

Dicta sunt explicabo. Nemo enim ipsam voluptatem quia voluptas sit aspernaturaut odit aut fugit, sed quia consequuntur. Dicta sunt explicabo. Nemo enim ipsam voluptatem quia voluptas.

Nemo enim ipsam voluptatem quia voluptas

Dicta sunt explicabo. Nemo enim ipsam voluptatem quia voluptas sit aspernaturaut odit aut fugit, sed quia consequuntur. Dicta sunt explicabo. Nemo enim ipsam voluptatem quia voluptas.